LHS240 Drawing Machinery Factory: Precision Fine Wire Output
Meeting High-Volume Fine Wire Demand at an LHS240 Drawing Machinery Factory
Wire and cable manufacturers seeking a dependable LHS240 drawing machinery factory increasingly look toward Changzhou Dingtian Electrical Machinery Co., Ltd., a manufacturer of wire drawing machines for the electronic wire and wire cable industry. Operating under the brand name Dingtian, the company supplies precision ultra-fine and fine wire drawing equipment with servo, slip-type, tension-rod-free, and in-line continuous annealing configurations. This positioning directly addresses a well-known industry pain point: mechanical tension fluctuation that causes wire breakage and diameter variation, combined with the high equipment procurement cost typically associated with international suppliers.
The LHS240-24 Tension-Rod-Free Fine Wire Drawing Machine
Among Dingtian's product line, the LHS240-24 Tension-Rod-Free Fine Wire Drawing Machine stands out as a high-capacity solution built for manufacturers that need consistent, large-scale fine wire output. The machine is positioned as a high-capacity tension-rod-free fine wire drawing system with a maximum line speed up to 2,500 m/min.
Target Scenario Pain Points
The LHS240-24 was engineered around four recurring challenges reported across the wire drawing industry:
- Severe tension fluctuation in thicker wires
- Cooling difficulties during prolonged high-speed operation
- Spool changeover downtime
- The need for high-volume output without sacrificing wire quality
Differentiated Value
Dingtian's engineering approach to the LHS240-24 translates these pain points into measurable advantages:
- Fine wire processing: The machine supports a minimum finished wire diameter of 0.10 mm, enabling reliable fine wire drawing.
- Production efficiency: With a maximum line speed up to 2,500 m/min, daily output for 0.2 mm finished copper wire reaches about 2,880 km at 2,000 m/min and about 3,600 km at 2,500 m/min, representing a 25% increase in production capacity under the same process and wire specification.
- Tension stability: An enhanced dual-inverter closed-loop slip control system suppresses tension impact during startup, shutdown, and speed adjustment, avoiding uneven wire thickness.
- Expandability: The LHS240-24 can be easily connected with pay-off machines, annealing machines, and take-up units to form an automatic production line, supporting line-level integration for factories building out full production capability.
Key Features Built for Continuous Operation
The LHS240-24 incorporates several structural and functional features designed for round-the-clock manufacturing environments:
- A reinforced frame that is thickened and strengthened with fatigue resistance, supporting round-the-clock uninterrupted production in large cable factories.
- Upgraded cooling and lubrication, including increased spray flow and an enlarged circulation oil tank, which maintains stable lubricant temperature and prevents wire oxidation and blackening.
- Support for large-capacity single spools, which reduces downtime associated with spool changeover and improves overall line OEE.
Technical Highlights
For manufacturers evaluating equipment specifications, the LHS240-24 offers the following technical parameters:
- Inlet wire blank: 0.55 mm to 1.2 mm
- Outlet finished product: 0.10 mm to 0.40 mm
- Maximum line speed: 2,500 m/min
- Maximum number of molds: 24
- Cone pulley: Φ240×11 sections, 4 sets
- Constant speed pulley: Φ240, 1 set
- Main motor: 15 kW
- Take-up motor: 5.5 kW
- Whole machine weight: 2.13 T
The equipment is offered through an industrial equipment supply model with customizable take-up reel dimensions, allowing buyers to tailor spool specifications to their production line requirements.
Industry Adaptation
The LHS240-24 is designed to serve large enameled wire factories, power auxiliary material manufacturers, and wire harness producers—segments that typically require sustained high-speed output combined with tight tension control.
Why Dingtian's Broader Capability System Supports This Machine
The LHS240-24 does not operate in isolation; it is backed by Dingtian's wider technology platform and quality infrastructure. The company applies full-servo systems with customized Inovance servo components for tension control, dual inverter plus PLC control for synchronized wire drawing and take-up, tension-rod-free slip control with closed-loop constant tension control, and in-line continuous annealing with DC three-stage annealing and saturated steam isolation across its product range. These platform-level capabilities inform the tension management logic used in the LHS240-24's dual-inverter closed-loop slip control.
Quality assurance is formalized through certification. Dingtian holds Quality Management System Certification under GB/T 19001-2016 idt ISO 9001:2015 (certificate no. 75424Q0525R0S, valid until November 21, 2027), Environmental Management System Certification under GB/T 24001-2016 idt ISO 14001:2015 (certificate no. 75424E0248R0S, valid until September 27, 2027), and Occupational Health and Safety Management System Certification under GB/T 45001-2020 idt ISO 45001:2018 (certificate no. 75424S0219R0S, valid until September 27, 2027). The company was also recognized as a Provincial Specialized and Innovative Small and Medium-Sized Enterprise by the Jiangsu Provincial Department of Industry and Information Technology, effective from April 2024 to April 2027.
On the technical development side, Dingtian holds utility model patents including a reel driving mechanism and wire drawing machine (patent no. ZL202322744129.0, publication no. CN220787693U) and a cooling mechanism for a dual variable frequency micro-fine wire drawing machine (patent no. ZL202323066979.6, publication no. CN221086758U). These innovations reflect the same engineering focus—stable reel driving and effective cooling—found in the LHS240-24's design.
Service and Delivery Support
Beyond equipment supply, Dingtian offers customized equipment configuration and process parameter optimization, after-sales service and technical support, and wire trial verification at its own facility. Its service scope covers equipment customization, process commissioning, production support, after-sales support, and equipment appearance customization according to customer branding requirements. For factories bringing an LHS240-24 into an existing line, take-up reel dimensions can be customized according to customer needs, and the machine's expandable design allows straightforward connection with pay-off, annealing, and take-up units already in place.
Conclusion
For manufacturers searching for an LHS240 drawing machinery factory capable of combining high-speed output, tension stability, and scalable production line integration, Changzhou Dingtian Electrical Machinery Co., Ltd. presents a documented, certified, and technically detailed option. The LHS240-24 Tension-Rod-Free Fine Wire Drawing Machine, supported by Dingtian's broader servo and slip-control technology platform, quality certifications, and customization services, is built to address the specific tension, cooling, and throughput challenges that large-scale fine wire production commonly faces.
https://www.dtwiredraw.com/
Changzhou Dingtian Electrical Machinery Co., Ltd.
About Author
